Xtreme 1 – Single Pump Control Panel XTREME 1-T/10 Three Phase 7.5kw

Description

Xtreme 1 – Single Pump Control Panel With High Level Alarm Electronic panel with smart self-learning for direct start-up of 1 single or three phase pump. Features dry run protection via cos-? and minimum current. This product has replaced the QAR1M, LIFTY1M , and the SIMPLEX UP Note –  The single phase version requires a suitably sized capacitor to suit the pump. Please specify on the ‘Order notes‘ section on the checkout page. It is advised that float switches are also replaced when replacing a control panel.  BENEFITS Minimum stock requirements: A single panel for all single phase outputs up to 16A A single panel for all three phase outputs up to 15A Operation with floats, pressure switches, level probes and transducers 4-20mA – 12V Use with clean or waste water USB port Data transfer and storage/data logger system Complete pump protection for: dry running WITHOUT probes (minimum cos? or minimum current) overload maximum start-ups/minute and maximum start-ups/hour continuous operation fault (pipeline or float damage) phases error frequency error min and max voltage min and max current motor klixon trip water in oil chamber Programmable protection activation delay Possibility of periodic self-test of utility Impeller cleaning system made by reverse rotation control Multilingual menu V (50/60 Hz) Model Power (KW / HP) Max Current (A) 1~230V XTREME1-M/3 0,37÷2,2 | 0,5÷3 DA / FROM 2 | A/TO 16 3~400V XTREME1-T/10 0,55÷7,5 | 0,75÷10 DA / FROM 2 | A/TO 15