PRESFLO Pump Controller 110V

Description

DG Flow – Presflo Electric Pump Controller 110v INSTALLATION & USE The PRESFLO 110v pressure sensing pump controller automatically starts and stops the pump, It is a substitute for traditional pressure switch/surge tank systems while offering important advantages. NB Please ensure your power supply cable is large enough and as short as possible to ensure sufficient voltage reaches the controller. KEY FEATURES – Water Accumulator – Built-in – Non-Return Valve – Built in – 3 Piece Union – Integrated – IP65 – Enclosure – Resin protected PCB – Free Positioning – Vertical, Horizontal or any angle – Excessively Frequent Starts – Protection with auto reset – Dry Run – Protection with auto reset 3 Piece Union – integrated – Avoiding the need of expensive 3 piece unions Non-Return Valve – built-in and with easy inspection – Avoid the need to install one Pressure Gauge – easy-to-add – Optional: it can be added anytime Pump Matching Essential Check Carefully check the electric and hydraulic features and make sure they comply with those of the pump and the system, but in particular: Presflo 1.5 bars start pressure requires: – pump head of at least 2.5 bars & – the water column between the device and the highest user point must not exceed 15 mtrs – less 2 mtrs tolerance = 13 mtrs TECHNICAL DETAILS: Max Pump Power: 1.5Kw / 2.0Hp Start Pressure: 1.5 bar Max Current: 16A Water Storage: Spring Membrane Protections: Dry Run / Frequent Starts Voltage: 110V Frequency: 50/60Hz Connections: 1″ BSP – MALE INLET – FEMALE OUTLET Cut Off Flow Rate: 2 l/min IP Protection: IP65 2015 VERSION – PLEASE NOTE THIS HAS DIFFERENT DIMENSIONS & CONNECTIONS TO THE PREVIOUS MODEL. Please select the option to include a Male 1″ BSP Outlet Adapter when replacing an old Presflo with a new model.