PRESFLO MULTI Pump Controller 240v

Description

DG Flow – Presflo Multi Electric Pump Controller INSTALLATION & USE The PRESFLO pressure sensing pump controller automatically starts and stops the pump, It is a substitute for traditional pressure switch/surge tank systems while offering important advantages KEY FEATURES – Water Accumulator – Built-in – Non-Return Valve – Built in – 3 Pieces Union – Integrated – IP65 – Enclosure – Resin Protected PCB Electronic Board – Free Positioning – Vertical, Horizontal or any angle – Excessively Frequent Starts – Protection with auto reset – Dry Run – Protection with auto reset – 3 ltr tank 3 Pieces Union – integrated – Avoiding the need of expensive 3 pieces unions Non-Return Valve – built-in with easy inspection – Avoid the need to install one Pressure Gauge – easy-to-add – Optional: it can be added anytime 3 litre Diaphragm Water Tank – Preloaded at 1.5 bar. Adjustable Start Pressure – Easily and intuitively by turning a screw using the supplied screw driver Pump Matching Essential Check Carefully check the electric and hydraulic features and make sure they comply with those of the pump and the system, but in particular: Presflo 1.5 bars start pressure requires: – pump head of at least 2.5 bars & – the water column between the device and the highest user point must not exceed 15 mtrs – less 2 mtrs tolerance = 13 mtrs TECHNICAL DETAILS: Max Pump Power: 1.5Kw / 2.0Hp Start Pressure: 1.0 – 5.0 bar Max Current: 16A Water Storage: 3 ltrs tank Protections: Dry Run / Frequent Starts / Over Current Voltage: 230V Frequency: 50/60Hz Connections: 1″ BSP Cut Off Flow Rate: 2 l/min IP Protection: IP65