Pedrollo TOP Submersible Clean Water Drainage Pumps TOP 2 Automatic With Float

Description

Pedrollo TOP Submersible Clean Water Drainage Pumps INSTALLATION & USE The Pedrollo TOP submersible pump series is suitable for use with clear water that does not contain abrasive particles. Innovative design and advanced technology are incorporated into these new Pedrollo TOP pumps, designed to be easy to use and extremely reliable even when subjected to continuous use (subject to correct installation). As a result of the design solutions that have been adopted, such as the complete cooling of the motor, and the shaft with double seal, these pumps are perfect for most drainage applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps . The motor is fully cooled and has an ample reserve of power plus a double seal system with barrier chamber of bio-degradable oil. The motor and the pump are easily removed, making maintenance and repair simple. When designing performance levels for TOP pumps, special attention was given to typical requirements for domestic usage. Performance curves specially designed for high delivery rates at the low installed power rating. CONSTRUCTION Pump Body: Technopolymer Suction Filter: Technopolymer Suction Plate: Stainless Steel AISI 304 Diffuser: Technopolymer Impeller: Noryl GFN2V Motor Casing: Stainless Steel AISI 304 Motor Casing Plate: Stainless Steel AISI 304 Motor Shaft: Stainless Steel EN 10088-3 – 1.4104 Power Supply: 230V Single Phase (230/1/50) Port TOP 1-2-3 – Outlet: 1’1/4″ BSP Male Port TOP 4-5 – Outlet: 1’1/2″ BSP Male Supplied with Hose Connector with Union (Hosetail): TOP 1-2 ø 25mm TOP 3 ø 35mm TOP 4-5 ø 41mm Cable Length: 10m PERFORMANCE RANGE Flow rate up to  360l/min (21.6 m³/h) Head up to 15.5m APPLICATION LIMITS Immersion Depth: 3m for TOP 1-2-3; 5m for TOP 4-5 Maximum liquid temperature: 40 °C (maximum liquid temperature 90 °C for a maximum of 3 minutes of intermittent service) Passage of suspended solids up to ø 10mm Suction level: 14mm above ground level for TOP 1-2-3; 30mm above ground level for TOP 4-5 Continuous Service S1