Pedrollo TOP FLOOR Submersible Drainage Pump for Low Level Suction TOP 2 Floor

Description

Pedrollo TOP FLOOR Submersible Drainage Pump for Low Level Suction INSTALLATION & USE The Pedrollo Top Floor series is suitable for use with clear water that does not contain abrasive particles. As a result of their ability to drain water to a level of 2 millimetres above ground level, they are suitable for use in domestic emergencies where a small area must be drained to the lowest possible level. Common uses for the Pedrollo Top Floor include domestic emergencies where a small area needs to be drained to the lowest possible level. CONSTRUCTION Pump Body: Technopolymer Suction Filter: Technopolymer Suction Plate: Stainless Steel AISI 304 Diffuser: Technopolymer Impeller: Noryl GFN2V Motor Casing: Stainless Steel AISI 304 Motor Casing Plate: Stainless Steel AISI 304 Motor Shaft: Stainless Steel EN 10088-3 – 1.4104 Outlet: 1’1/4″ BSP Male Power Supply:  230V Single Phase (230/1/50) Supplied with Hose Connector with Union (Hose tail): TOP FLOOR 1 ø 25mm TOP FLOOR 2 ø 35mm Cable Length: 10m PERFORMANCE RANGE Flow rate up to: 160 l/min (9.6 m³/h) Head up to: 9m APPLICATION LIMITS Immersion Depth: 3m Maximum liquid temperature: 40 °C (maximum liquid temperature 90 °C for a maximum of 3 minutes of intermittent service) Passage of suspended solids up to ø 2mm Suction level down to: 2mm above ground level The Pedrollo Top Floor series are suitable for use with clear water that does not contain abrasive particles.