Pedrollo D Submersible Drainage Pumps D30N Manual (No Float) Three Phase

Description

Pedrollo D Submersible Drainage Pumps INSTALLATION & USE Pedrollo D pumps are designed for draining clear or slightly dirty water, the D series pumps are recommended for domestic, civil and professional applications for draining flooded interiors such as basements and garages, for emptying swimming pools and tanks, for disposal of waste water which is not filthy. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. Please note: Three Phase Pumps do not come with a float switch. CONSTRUCTION Models: D8N | D20N | D30N Pump Body: Cast Iron with threaded port in compliance with ISO 228/1 Suction Filter: Stainless Steel AISI 304 Suction Plate: Stainless Steel AISI 304 Impeller: Technopolymer open type (closed for D30) Motor Casing: Stainless Steel AISI 304 Motor Casing Plate: Stainless Steel AISI 304 Motor Shaft: Stainless Steel EN 10088-3 – 1.4104 Power Supply: 230V Single Phase (230/1/50) or 400V Three Phase (400/3/50) Outlet: 1’1/2″ BSP Female Power cable length:  10 m – Float switch for single-phase versions PERFORMANCE RANGE Flow rate up to  300l/min (18 m³/h) Head up to 26m APPLICATION LIMITS – 5 m maximum immersion depth (with a sufficiently long power cable) – Maximum liquid temperature 40 °C – Passage of suspended solids up to Ø 10 mm – Suction down to 17 mm above ground level – Minimum immersion depth for continuous service: 220 mm