Marco UP6/AC Gear Pump 220V

Description

UP6/AC 220V Gear pump PTFE INSTALLATION & USE Self-priming electric gear pump for the transfer of liquids of varied nature for discontinuous or intermittent usage. Completely equipped with in-line filter on the inlet side. There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned: – transfer of diesel between tanks, refuelling of tractors and earth moving equipment – transfer of water – transfer of lightweight lube oils, antifreeze etc. CONSTRUCTION Code: 1640611C Type: UP6/AC Volt: 220V Consumption: 1.7A Fuse: 2.5A Self Priming up to: 1.5m Ports: 1/2″ BSP PTFE gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seals in FKM and O-ring in NBR. PERFORMANCE RANGE Max Flow Rate: 28 l/min Max Pressure: 5 Bar APPLICATION LIMITS Fluids Allowed / Not Allowed: Allowed: Fresh Water (max. 40°C-104°F) Allowed: Diesel Fuel minimum flashpoint (PM): 55°C-131°F NOT Allowed: Petrol (Gasoline) NOT Allowed: Flammable Liquids with PM 20 cSt NOT Allowed: Foodstuff Liquids NOT Allowed: Corrosive Chemical Products NOT Allowed: Solvents Temperature: Min -10°C / max 60°C Relative Humidity: max. 90°C