Challenger Series 200 Litre Vertical Pressure Vessel

Description

Global Water Solutions Challenger Series 200 Litre Vertical Pressure Vessel INSTALLATION & USE 200 Litre Pressure Vessel ideally suited for a wide range of applications, including booster systems, thermal expansion, heating expansion, irrigation systems, and hydraulic hammer arresting. Vertical tanks are supplied with a base unit. Efficient and cost effective, Challenger™ tanks are designed with a patented controlled action CAD-2 diaphragm assembly. They feature a chlorine resistant 100% butyl diaphragm with a precision moulded copolymer polypropylene liner for superior air and water separation. The CAD-2 diaphragm assembly is clenched together with a positive lock internal clench ring which contains drawdown water in a pre-charged air atmosphere, thus producing separation between the diaphragm and tank wall. This “air buffer” design means fewer problems with condensation. Constructed with an FDA approved high grade butyl, the diaphragm assembly seals water in a true non-corrosive chamber. On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection. The air chamber is sealed with a fixed o-ring and closed cell foam and will provide many years of leak free and service free life. ** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump ** Common Applications: Challenger™ tanks are ideally suited for a wide range of applications, including booster systems, thermal expansion, heating expansion, irrigation systems, and hydraulic hammer arresting. CONSTRUCTION Patented CAD-2 diaphragm technology NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved Stainless steel water connection Condensation reducing design Two part polyurethane, epoxy primed paint finish Leak free air valve cap sealed with closed cell foam Comprehensive testing No maintenance Standard System Connection: : 1 1/4” BSP stainless steel elbow APPLICATION LIMITS Maximum working temperature: 90 °C Maximum working pressure: 10 bar